Posted 8/31/2020 20:57 (#8468811) Subject: Intelliview 4 / Pro 700 intermittent usb problem
Eastern Shore of MD
In our CR combine. Has the same usb it’s always had, never an issue. Yield data is routinely removed so it’s not full.
Problem is about 75% of the time, when we power combine on, it instantly says (after boot up) that the memory device was not detected, just as if the usb was removed.
Cycle it a couple or a few times and it might pick it up.
Intelliview 4 / Pro 700 intermittent usb problem
