|
North AL | I have an 8235 R with a GS3 command center and 2630 on corner post running planter and greenstar functions. I was troubleshooting some data import issues today regarding machine offsets not automatically being pulled into the 2630. Anyway, I believe I changed the vehicle bus to VT2, and now have lost ability to manipulate the Command center via the scroll knob or check button.
I have tried: Changing settings on 2630, Pulling plug on 2630 then turning tractor off and back on and it still will not recognize the command center. My next step is to pull the command center fuse with machine on.
Any input is appreciated. Thanks | |
|