|
| Our 2013 Kinze 3600 is trying to raise the wings to lock position as you are going across the field once you have unfolded and released them into the run position. It seems to be a lot worse when using the markers which are obviously on the same remote. We’ve tried switching remotes, exchanging cartridges on the V4 location on the right hand rear valve block with another cartridge, and attempted to check magnetism on the V4 solenoid. None of these have solved our problem. It seems to be worse when the hydraulic flow is higher. Has anyone experienced this issue? | |
|
Kinze 3600 wing issue
