|
Almost god’s country | Spray trailer is set up to load from driver side, load sprayer on passenger side. The valves to pull out of each tank or shut a tank off are on passenger side. Hot load class act into water. So try to fill each tank separately a little more accurate. Has anyone made a handle to “over center” banjo valves so you can open and close from other side of the trailer? Back tank fills faster and normally running around getting chemicals for the load or topping of chem totes/switching chem out start running water over and than have to run around the trailer after started overfilling
(68C86154-B8CA-418B-9600-7314977E182D (full).jpeg)
(0E700DAB-59D5-4FE4-8CFD-99E3281BD13E (full).jpeg)
(014BF6B5-20DF-4A94-BE2D-75851D6530EC (full).jpeg)
(D0DFC9D4-312A-408E-B1E9-ACF4A46851D6 (full).jpeg)
Attachments ---------------- 68C86154-B8CA-418B-9600-7314977E182D (full).jpeg (113KB - 53 downloads) 0E700DAB-59D5-4FE4-8CFD-99E3281BD13E (full).jpeg (123KB - 40 downloads) 014BF6B5-20DF-4A94-BE2D-75851D6530EC (full).jpeg (99KB - 30 downloads) D0DFC9D4-312A-408E-B1E9-ACF4A46851D6 (full).jpeg (141KB - 48 downloads)
| |
|