This coupler (what's left of it) goes between the engine and hydrostat on an older front mount mower.  It consists of 2 rubber discs about 3.75" diameter and 1.625" thick.  There are 4 aluminum spacers molded into the rubber that bolt to the corresponding flanges on the engine and transmission.  I can't find any information on the mower (too many ownership changes for the company) and I can't find any similar couplers.  Changing to a lovejoy or other style coupler is probably going to be more configuration work than I'm willing to put into this mower.  Any help is appreciated.

Thanks,

Mike

(IMG_20190605_090538730 (full).jpg)

(IMG_20190605_090559551 (full).jpg)

(IMG_20190605_090621181 (full).jpg)

IMG_20190605_090538730 (full).jpg (125KB - 41 downloads)

IMG_20190605_090559551 (full).jpg (90KB - 46 downloads)

IMG_20190605_090621181 (full).jpg (138KB - 42 downloads)