|
| We have a PRO 600 monitor for our 2004 Case IH 1200 corn planter and we are trying
to get the section shutoffs working. We purchased the cable to send the GPS signal from
a Trimble FMX to the PRO 600 from AG Express and hooked it up from port "D" on the
FMX to the serial port on the PRO 600. Then we purchased the proper memory card and
formatted it to FAT 32 and installed it in the PRO 600. We then started the tractor and
the PRO 600 started to boot up and then showed the CASE AG screen for a few seconds
and then shut down to reboot and kept doing this time after time and never booted up to
the home screen until we removed the data card. Anyone ever have this problem before?
Thanks in advance for any insight on this problem.
Greg | |
|