|
SCMN | What's the fix for these things. I've opened them up and greased the gears. Bearings are OK. Even tried lube in where the spring is. They spin OK when on (no power). My hyd drives hesitate when they all clutch off at the same time. Point rows where they turn off one at a time the drive is OK. Coming out of the headland the drives get turning like they should and when the clutches turn on the drives speed up for a half turn or so.
Is this hard turning clutches or just a quirk of RowFlow?
Any big money to fix it might as well go towards V Drive.
Edited by rollig 5/14/2019 15:36
 (EEF89D7E-B596-41D8-870B-1551CA96668D (full).jpeg)
Attachments
----------------
 EEF89D7E-B596-41D8-870B-1551CA96668D (full).jpeg (233KB - 39 downloads)
| |
|
Rowcommand Clutches Turn Hard When Off (Powered)
