|
Manitoba, Canada | We have a 20/20 Seedsense gen2 with 2 rowflow modules on our 24 row planter. Each rowflow has one hyd motor output/control active (one for each half of the planter) and each rowflow also does 12 rows of clutching. Now the rowflow cab switch box has three section control switches (left center & right). Currently the left and right switches each control 12 rows but I'd like to use all the switches to do 8 rows each (8 row combine header). Is there a software/setting solution or do I create a phantom 3rd motor and jump the pressure and encoder feedback from one of the other motors to fool the 20/20 into thinking motor 3 is working? | |
|
20/20 Rowflow Cab Section Switches
