|
Boone, Iowa | I was running my tractor a bit today, after overhauling the engine. I found a bad clamp on the hose going to thermostat and was causing a little leak. Shut tractor off to replace hose clamp and top plastic tank on radiator split and started spraying antifreeze all over. I had noticed during the overhaul, the top tank was warped a little bit. My question is if anyone has replaced the gaskets and top and bottom tanks or if that is not a good idea. I cannot get a hold of the radiator shop to get their opinion and if they would do the work. Thanks.
Edited by jedeka 3/8/2019 16:22
| |
|
Mx240 radiator tank leaking
