|
Georgia | So we are going to apply gran fert to a small bit of corn. The chart says to select output desired, ground speed, and time to drive 500ft. The formula is
Output = desired amount/acre x row width x # rows
———————————-
1045
(Theoretical numbers). I want to apply 300lbs, 36in rows, 2 rows/box
So output = 300 x 36 x 2 / 1045
Output = 20.66lbs
So for the time I recorded to drive 500 ft, I should be collecting 20.66lbs ??
Also, it shouldn’t matter if I’m feeding one side of the row or each side of the row, output is output correct?
Thanks! | |
|
Check my math, calibrating granular fert distributor
