|
West Central WI | After debating about it the last couple years, I finally broke down and ordered an ISO scale for my case 1255 planter. Salesman I deal with from local dealer dropped it last off last night so it was kind of my Christmas when I walked in the shop
Install looks quite easy and he told me that scale tech said the scale just plugs into the can bus line on the planter to run thru the VR on the pro 700. Looks really simple but being I only inventoried everything this morning, I didn't feel lot bothering anyone this weekend but I'm going to ask them on Monday
I have tried to locate an obvious plug for the scale which I can't find. Did locate the can bus line coming in from the tractor which the vauge picture in the directions seen to indicate it plugs into it (pic 1 & 2). Makes sense to me but I'm thing there is supposed into the iso box cable as there not the same (pic 3).
Has anyone done this before? Just curious where it is so I can get going on the install this weekend otherwise I'll wait till Monday when I talk to them
Any help is appreciated
 (IMG_20190209_142221835 (full).jpg)
 (IMG_20190209_142304485 (full).jpg)
 (IMG_20190209_142402202 (full).jpg)
 (IMG_20190209_142353665 (full).jpg)
Attachments
----------------
 IMG_20190209_142221835 (full).jpg (110KB - 89 downloads)
IMG_20190209_142304485 (full).jpg (73KB - 87 downloads)
IMG_20190209_142402202 (full).jpg (125KB - 90 downloads)
IMG_20190209_142353665 (full).jpg (185KB - 88 downloads)
| |
|
Installing ISO scale on planter question
