|
Central, IN | Ok so this is our first time doing this and we are looking for some advice. First and foremost we want to make sure we are safe about this. We have two Bierman jacks to lift it up. The way we measure it we need 40-42 inch’s of clearance from the bottom of the hub housing in order to drop the leg out. Our main question is how have you lifted it? We are thinking either lift it by each corner and do one at a time, one concern is will we hurt anything by lifting it that high off one corner?? The other we thought about is lift one front and rear at the same time so its lifted equally, so maybe it won’t twist. We would still only change one at a time but both would be lifted to the heigth to change. We are pretty mechanical but always looking for advice from someone that has already done it. Thanks for any info you can give me. I have looked up other threads but not really seeing what I need to know. | |
|
Hagie STS Bushing Change Question/Help
