|
West Central Iowa | I am moving an Autopilot setup to a different tractor, but using a different monitor and receiver/antenna and I am having trouble finding any info on what cables I need.
The current set up is an EzGuide 500 with a AG15 antenna.
The new set up will be Insight with a Trimble 252 RTK unlocked receiver.
The Insight did not come with any cables at all. I know I will need an AgLeader 2000819 null-modem cable and a Trimble 54612 to connect to the Nav II, both of which I already have. What I am have trouble with is the cable(s) to connect to the Insight and a cable for connecting to the 252.
I have spent a fair amount of time searching the internet and AgLeader and Trimble's websites with no luck. And I cannot find a cable guide for this setup on the net.
Thanks for any help you can give me. | |
|
Insight, Autopilot and 252 receiver-what cable part numbers needed?
