NC Iowa | This spring when I was setting up my Pro700 to control a 24 row case 1250 planter I was able to input Equipment Width, Swath Width and Bar Distance. I am now going to be running the same tractor with the pro700 to do guidance when pulling my strip till toolbar. It will not be doing any controlling just guidance.
I am going to be making all new guidance lines this fall when doing my strips. This time however I am only able to change teh Equipment Width and Swath Width but can't do the Bar Distance. Won't I need to be able to change the bar distance in order to accurately make the guidance lines that way when I come back in the spring the planter is doing the same route? |