|
| I have a Greenstar Liquid Rate controller that I have on a 3 point hitch sprayer. I am curious if anyone has any experience with connecting that rate controller through ISOBUS to a trimble display. I was told be a John Deere AMS person that the liquid controller would work but not a dry controller. I have it hooked up but can not get it to come up on my trimble display. I also have variable rate spreader that has a raven controller on it and I run it with the same tractor so I do know that the ISO is working properly. I used to run a deere guidance system on this tractor but decided to switch all my tractors to trimble on account of service and just not getting what i wanted out of deere. Any help on this will be appreciated. | |
|