|
Fruitland, ID | I have noticed on half a dozen machines that I maintain that they are coming up with a Communication Error page. Most are JD Tractors 7x00 and 7x10 running both 1800 and 2630 displays with 3000 receivers. It states that it has lost communication with the steering controller. It will drop the Autotrac controller off the bus and sometimes the GPS Receiver. I have checked BUS voltages and seem to be ok. I have swapped terminators with no change. It seems like they are all doing it at the same time now, some machines have been running for a couple years with no problems and others a few hours. Curious if anyone else has seen this issue pop up??? | |
|
Autotrac Controller Raven
