|
Dyersville, Ia. | We bought a John Deere 4320 for my sons FFA project got it home last fall in time for silage we knew the radiator was leaking and had oil leak in clutch housing so fixed those problems right away, wanted all leaks fixed before we painted it. First day hauling silage clutch was slipping in road gear so we split it again to find previous owner didn't have fly wheel ground right (only had 100 hrs on new clutch when we bought it) didn't cost much just our time. Had rainy day while chopping. Used it couple days and pto locked up, found what looked like a chisel in transmission,didn't hurt any gears just wedged in between two couple gasket and back running. So we put it on our rollermill bagger two loads into it engine locked up. so after harvest we did a major overhaul and painted it, here is our final project. Glad to be done but enjoyed every minute working on this project with him. He has decided to go to college for mechanics.
(C701E1F9-CC3A-4D8E-8854-9D513E56D81D.JPG)
(E2D2F757-A70B-4971-905D-957C77A68862.JPG)
(46326992-A76F-4DBD-947B-FF8142F326AC.JPG)
(IMG_0683.PNG)
(59782ADA-3E8A-4690-854F-F600813B2970.JPG)
Attachments ---------------- C701E1F9-CC3A-4D8E-8854-9D513E56D81D.JPG (127KB - 117 downloads) E2D2F757-A70B-4971-905D-957C77A68862.JPG (139KB - 111 downloads) 46326992-A76F-4DBD-947B-FF8142F326AC.JPG (125KB - 129 downloads) IMG_0683.PNG (237KB - 125 downloads) 59782ADA-3E8A-4690-854F-F600813B2970.JPG (113KB - 105 downloads)
| |
|