I'm working on a Dickey John motorized hydraulic flow control valve. It has four harness wires...black, white, red, green. The top microswitch has green, red, and white harness wires on the three terminals. The terminal with the white harness wire also has the red motor wire attached. The bottom micro switch has black harness on the first terminal, the second terminal is jumpered to the 2nd on the top switch, and the third terminal is attached to the black motor wire.

I've been here before, and I understood the logic that it works under once I finally figured it out, but I can't for the life of me get it figured out again.

Which wire hooks to what? Choices are +, -, open, close.

Correction...I think the choices are +, open, close, alarm 

Drawing is forthcoming once I get back to the scanner.

Edit....I think I have worked it out.  Gotta go check my 'answer' after supper.