|
South Carolina | I have just rebuilt the shaker system on my 2388. New bushings, washboard in front and one new top frame rail. I am having a problem centering the system in the machine. One frame rail is hitting the side of the machine. and the other has 1 inch clearance from side. I currently have one washer as shim for each bolt in top frame system. It looks like it might take a least 4 shims on the back right corner to get the frame from hitting the side of machine. Does anybody know the proper way to center the frame in the machine? I think there was a bulletin at one time for this and would like to know if anybody has a copy. Thanks | |
|