Near Intersection of I-35 & I-90 Southern Mn. | I received notice of some Ag Leader updates. In my case, they pertain to my InCommand 1200s and SteerCommand. For the InCommand it is version 2.5 following Ag Leaders policy of issuing updates twice a year.
It appears there are updates for the InCommand 800's and Integras as well.
Updates for the displays can be downloaded from the Ag Leader website. The SteerCommand update is reserved for dealer use as the procedure is more complex.
Changes in the InCommand 1200 include but are not limited to:
Full Screen Video from an external camera
Ability to have the Video show a reversed mirror image (rear view mirror)
Ability to toggle off the auto save for new AB lines
Two counters in harvest mode - can be reset independently
Ability to use less Cal loads for calibration if desired
The InCommand download is fairly large and took a bit to download.
The other upgrade (available for dealer install only), affects the ECU used for steering. The release notes suggest that improvements have been made for OnTrac 3. Also there was mention of some other issues which don't seem to pertain to me. One should check with their dealer concerning this update.
Edited by tedbear 8/17/2017 06:15
|
Ag Leader Firmware Release
