|
South Central Nebraska | Did not know that every time after shut down and startup of monitor (2630) , I have to dispense liquid ( start planting, do rinse test, or do nozzle flow check) to get PWM valve to open for tank agitation (getting pwm valve to open for the first time) .
I have found to not turn on hyd flow and do rinse test then turn on hyd flow to get pump to run so as not to dump out starter Fert or spray solution. . JD says that is normal for JD rate controller. I do not have to do that with JD 4940 sprayer.
Thanks for any comments | |
|