|
| We have recently developed an issue with our raven cruizer ii gps. We have the cruizer ii with the accurow node to control the shutoff clutches on our 8 row kinze 3500. The system has worked well for the last 4 seasons. The planter is set up with two clutches, therefore 2 sections. The issue developed when we moved to our second field this season. The issue is that the two sections will not change from red to green on the cruizer ii console, causing the planter not to plant. The cruizer had good gps reception and the master switch on the planter is working as it should because the shield in the top left corner of the cruizer is lit up green when the planter is in the ground. We have tried switching out the cruizer and the node and neither have made a difference. As a side note we have manual switches that will force the planter to plant. When we engage these switches the clutches still cycle as they should which basically eliminates a wiring problem from the tractor to the planter. Any help is appreciated. | |
|