|
| I have a 8230 autotrac ready. 7 years ago we put in the trimble autopilot. We use an fmx display with the trimble autopilot. Anytime we touch the steering wheel or try to engage autopilot we get this error code. Deere has replace the hydraulic valve and the steering column sensor and we still get this error code. We replace our Nav3 controller with a Nav2 and still get this fault. We have checked voltage at the steering column and have 5 volts on the orange wire at each connector.We updated firmware on the display to 10.11. The nav is running 11.05. Critical fault 117 Auto trac QSO not detected. Any ideas? | |
|
Trimble AutoPilot Critical Fault 117
