|
West Texas | Got a problem with the hydraulic coupler on a 2590 Case tractor I could use everyone's help on. The top (raise) coupler on the number 1 valve keeps uncoupling when I try to use the remote. I have replaced the coupler and male fitting on the plow but it will work for a little while and then it will come apart when pressure hits it. It also seems like when I put the remote in float it does not fully release the pressure on the system (plow wing wants to stay up). Cable to the remote appears to be adjusted like the number 2 remote and the flow is turned up on the remote body below the cab step. Do you think trash could be in the remote body or a broken spring in the remote? The number 2 remote works properly.
I hooked the same plow up the a 2390 case and the coupler never comes apart so I assume it is limited to something on the 2590 case.
Thanks for your help. | |
|
2590 Case Hydraulic Question
