|
| I have a Case IH 385 Steiger quadtrac. I think it is 2010 model year.
One of my hydraulic remote switches is out of calibration. It thinks that the switch is in the lower position when it is really in the neutral (middle) position. When I start the tractor it tells me to move EHR to neutral and the green cylinder light on the A post is on. If I pull the switch back slightly, the light will go out. I don't think that remote is pressurized because I can unhook and re-insert the hyd hose in the coupler and the problem remote is on my sprayer pump and it shows no pressure on the sprayer when the EHR is in neutral.
Is there a way to calibrate the EHR switches? Is that something that I can do or do I need the CIH tech? How do I calibrate?
Thank you! | |
|
case IH hydraulic calibration
