|
SW MINNESOTA | I moved my 20/20 and air force system from my old planter to my current one. Went to calibrate the lift switch but both the lowered and lifted reading on the calibration page read 0.0 and a get a calibration failure message. However when planter is raised I shows it shows its lifted on the 20/20 then when lowerd is shows the downforce reading like it's supposed to. It seems to switch from lifted to lowerd at about the right time also. Do I need to worry about the calibration if it's working this way or where do I start looking for issues? | |
|
Calibrating a 20/20 lift switch
