|
| I noticed the rear wheel had migrated outward on the axle. I loosened wedge(sleeve) and returned wheel to desired position and retightened wedge to 300lbs. The wedges were tight but the wheel was still loose on axle. I loosened off both wedges this time and retightened, still loose. I also tried to tighten wheel on a virgin position on axle and it appeared to be snug.
I imagine shaft is wore some? Will a new wedge(lower one with key) solve my problem OR can I place a shim between wedge and wheel? Thanks
Part #5
http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.vi... | |
|
jd4430 rear wheel loose
