|
| Anyone also doing this?
I've got most of the kit installed on the tractor, having trouble figuring out which lines go to the steering manifold.
Obviously the Right Steer and Left Steer lines are going to the A and B ports, and the Tank and Pressure line going to the P and T ports.
That leaves me with one line, the Load Sense line, I have two open ports left on the manifold, hence my confusion.
I have an EF port and a PS port left unconnected, any ideas where my Load Sense line goes? I'm tempted to say the EF port since the directions show a line attached there, but they also dont say anything about PS being capped off. | |
|