|
| My dealer is installing my EZ Guide plus, EZ Steer, and the EZ Boom in my Apache 760 sprayer. I still
want the Raven 460 to be wired into the mix. My thoughts are that when I lose signal ,
the Raven will still be running the rate controller and
keeping track of the gallons applied. I only want the EZ guide for the guidance and steering,
and the EZ Boom for section control. Am I right for thinking this way? Trimble shows a cable
available to hook into the Raven.
How should the booms be hooked into this setup? The
Apache has boom switches and a master switch. No boom switches on the 460.
Any advice is appreciated.
Duane | |
|
EZ Boom in an Apache 760
