|
| I recently updated my EZ guide plus and AgGPS 110 receiver to the latest firmware 4.11 and 3.06. The updates went smoothly, but I get the Low Accuracy 1Hz warning. Under the light bar data port settings I have 8NI at 38400 baud rate and the output rate at 5 Hz. Under the GPS diagnostics the Rx Rate is showing 5 Hz and I receiving a good signal from WAAS PRN 138. In the data port settings I am insure which Input to use? It seems to work fine with either the External GPS or TSIP receiver selected. I also do not have the option to auto select or edit in the GPS Corrections menu. Any Ideas? | |
|
EZ Guide Plus & AgGPS 110 Receiver
