|
South Central Illinois | I put master cylinders on, that helped quite a bit.
I put on a crossover check valve between the two hoses from the tractor, it works just fine at the lower pressure.
I am wondering about the check valve cartridge thing in the valve body.
When I lower the planter with the stops installed on the main frame wheel cylinders but not on the wing wheel cylinders.
Should the whole planter stop lowering when the main frame gets to the stops?
As it is now the wings will continue to lower slowly until the wings get to the ground.
Should the check valve in the valve body keep the wings from lowering below the main frame? | |
|
Update on leveling a JD 7200 planter
