I have had a few requests for pictures of how/where I located the ballasts and such for HID lights on the old White tractors so here are a few pics.

Pics 1 & 2 show the 4x6 Speaker light fixtures on the rear fenders of the 2-155.

Pic 3 shows the ballast and wiring for the rear fender lights, underneath the fender.

Pics 4 & 5 show the 3x5 Speaker light fixtures and the ballast/wiring crammed into the light box for the front fender lights on the 2-155.

Pics 6 & 7 show the replacement lenses for the front lights and the ballast/wiring located on the back side of the lights.

Pic 8 shows the back of the 2-155, the lights on the top corners of the cab are Speaker 4x6 fixtures with the ballast/wiring located under the cab roof.

Pic 9 shows the replacement lense used on the front fender lights of the 2-105, the ballast/wiring is in there as well.  Pic 11 is the backside of the front fender light box.

Possibly the best thing about changing out to HID bulbs is that you get a dedicated ground wire that you can get a good contact on instead of those miserable factory lights that ground through the fixture.

(resized HID lights 1.jpg)

(resized HID lights 2.jpg)

(resized HID lights 3.jpg)

(resized HID lights 4.jpg)

(resized HID lights 5.jpg)

(resized HID lights 6.jpg)

(resized HID lights 7.jpg)

(resized HID lights 8.jpg)

(resized HID lights on 2-105 1.jpg)

(resized HID lights on 2-105 2.jpg)

(resized HID lights on 2-105 3.jpg)

resized HID lights 1.jpg (50KB - 403 downloads)

resized HID lights 2.jpg (58KB - 417 downloads)

resized HID lights 3.jpg (52KB - 387 downloads)

resized HID lights 4.jpg (44KB - 398 downloads)

resized HID lights 5.jpg (48KB - 384 downloads)

resized HID lights 6.jpg (52KB - 410 downloads)

resized HID lights 7.jpg (54KB - 361 downloads)

resized HID lights 8.jpg (59KB - 371 downloads)

resized HID lights on 2-105 1.jpg (39KB - 395 downloads)

resized HID lights on 2-105 2.jpg (80KB - 409 downloads)

resized HID lights on 2-105 3.jpg (46KB - 405 downloads)