|
Alberta | Hi,
Just setting up an ezsteer on an 8010 and having a bit of trouble. The receiver is on the front of the hopper and I have the settings in from the ezsteer site for steering wheel diameter and angle/turn etc. The unit is very erratic shooting me side to side and last year on our JD combine the initial settings took very little fine tuning so I think I have entered something wrong. What I was thinking the trouble might be was the axle offset, I have it set as 36" in front of front axle. Anyone out there that would like to share their settings and advice would be great.
Thanks
p.s. Also have noticed the steering wheel tended to slip in the motor wheel a bit, tried roughing it up a bit but was thinking of other things like a leather wrap etc, any ideas?
| |
|
ez steer on 8010
