Posted 4/22/2011 17:57 (#1739124) Subject: Wiring a pwm valve to an EZ-Boom
NW Iowa
I'm building a cable to run a four section hydraulic planter control from an EZ-Boom. I've got everything figured out (I think) except I'm not sure about the pwm valve. Is it controlled by Pin 3 (open valve) and Pin 4 (close valve) of the main connector on the back of the EZ-Boom? The pwm valve is a Brand EFC valve ifthat is important. Thanks for any help.
Wiring a pwm valve to an EZ-Boom
