|
| I have just installed a new EZ Boom interfaced with my FM-!000 using it for guidance and rate control with Banjo ball valves for spray sections, raven flow meter and control valve. My problem is that I can open and close the ball valves in Manual rate mode, however, when I flip the rate switch to Rate 1 or 2 while moving, the valves close. I understand selecting manual while stationary or moving may have an impact but trying to do that in either situation still results in closed ball valves. It also will not allow auto boom switching in Manual mode, and yes, I have boom switching set to YES in setup. I have never been able to start out in Rate 1 or 2 either. Also, it seems that if I shut the valves off with the Master EZ Boom switch, I need to close the field and re-open it to be able to operate the valves manually, I think the FM1000 is version 1.00 and the EZ Boom is 1.04 (may need to double check that.) Any suggestions would be greatly appreciated. | |
|