Hoxie, KS, Northwest Kansas | Looking for any info on how to possibly wire a NAV II to a GS2 in a 9670 so I can recieve trimble RTK signals and use the GS2. How would you hook it up? Wiring harnesses that are available or just wire the NMEA signal to the GS2 harness. Or could I possibly wire a 900mhz trimble antenna to an itc reciever and skip the whole NAV II. If i use the NAV II how would i let it know which way it is oriented so it can give the right roll, pitch, and yaw. So in short I'm trying to get trimble RTK to a GS2 either with an trimble antenna on a iTC or the whole trimble set up and harnesses. Cheapest would be best. Thanks in advance. |