|
| I just got my iTech Pro activated today and need some help with the input dimensions to make my turns "smoother". Here are the vitals 9530T pulling a 61' 1830 hoe drill with a tow behind tank. My problem is when the tractor is "leaving the headland" and acquiring the auto trak line it turns very abruptly at the end, causing the tool bar to go backwards on the inside of the turn. I saw an earlier post that referred to stellarsupport, but with the press wheels on the back of the tool I need to have a small teardrop. I am already making 3 passes on the headland and have the turn sensitivity turned down to 50. Any help would be appreciated.
Thanks. | |
|