|
ecmn | I asked you a while back about calibrating my UD+ ym and just want to double check before I mess this up. Once I get my loads weighed and the weights entered, (I see in a post below you say you want them within a couple percentage points of each other for calibration loads) can I make them calibration loads in any sequence or do I do it in the order they were combine? Do I need to combine until I get 4 loads within 2 percentage points?
Lastly, I noticed on my receiver tonight that it doesn't show me the satelite it is running off of anymore. The screen reads D 3D with the rotating bar, sv09, DOPO2 on the top row and on the bottom it reads B A-R, 296.0, and sn21. We have been using satelite 138 and I am sure that used to display on the screen. I double checked the setting tonight and reset it to 138 heed health and it still didn't show that on the display. Is this going to affect my mapping?
Thanks for all the help!! | |
|
Torn, a couple questions
