|
East Central Indiana | I am in the middle of installing direct command on our 3330 and am to the step of making sure the accuboom bypass has been disconnected and the boom signals can pass directly from bulkhead #5 to the boom valves. Can anyone give some more info on what I need to do here? Connections to unhook or hook up? This sprayer has accuboom on it but not aim. It had pinpoint installed by the dealer.
Also, how do I know if I teed my pump switch into the correct 4 pin weatherpack? I found two both labeled remote/aim, one that had 2 wires in one side and a plug on the other side. The other connection has wires going both ways out of it. Thanks in advance. | |
|
direct command install on case 3330
