|
| Hey guys,
I was thinking that the Raven liquid control valves could be speeded up by entering a different calibration number in the console, am I correct on this ?
Here's the problem, when I take off from a dead stop and turn on boom sections ( 3 @ 20 ft each ) I can go about 10-15 ft forward until the correct spray pattern, pressure and rate comes around, and my outer 2 nozzles are weak ( so I am doing poor corner work ) but once I'm running in field, things work great. I just need some help in take off. Running a JD 4440 in B3-B4 at 8-10 mph on a Top Air sprayer
I use a 440 or a 660 with switch box. The valves I run are Raven PART # 10630172125, it is a STD VALVE select C-Sd, 1" poly flange style, and the valve cal is 2123.
Does that 2123 have something to do with milliseconds ?
Any help appreciated and as always THANKS IN ADVANCE. ! | |
|
Raven liquid control valve speed
