|
north central kansas | Any idea of this would work? I have a Hagie 284 with 2 400 gallon tanks that has a 80 gal tank mounted on the rear. It has TeeJet Rinse Nozzles in each tank. The sprayer is equipped with an air compressor and tank that is used for the air ride system. Could I plumb an air diaphram pump to deliver water to each rinse nozzle? I seen a pump in dultmeier by shurflo that might work. Probably have to put a solenoid valve on or could just plumb a manual valve and regulator on the air line. Will this work? What other systems have worked? Right now the two rinse nozzles are plumbed to a single 2" flange fitting. The problem is that I would have to be at the nurse trailer every time I wanted to rinse out. | |
|
air diaphram pump for rinsing sprayer tank or other plumbing options?
