|
Beresford SD | I am doing section control on a 16 row Kinze Stackfold planter. I will do 4 row sections with a total of four Tru count clutches. The Envisio Pro I have for this I also use on my dry spreader. It has no boom control switch but just 2 nodes for the dry spreader with one switch for the apron. It appears I have two options:
http://www.ravenprecision.com/sitecore/content/RavenSite/Products/P...
This will be needed for planter section control only .
If I use this :
http://www.ravenprecision.com/sitecore/content/RavenSite/Products/B...
I could also use it as a sprayer boom controller on my pull type sprayer. But as I understand this switch is the opposite, normally off versus normally on. So could I have some sort of relay to do this?
I would appreciate any input from others including dealers. My local Raven dealer is not real helpful...........
 (Envisio Pro.jpg)
 (Tru Count.jpg)
Attachments
----------------
 Envisio Pro.jpg (53KB - 323 downloads)
Tru Count.jpg (68KB - 399 downloads)
| |
|
Tru Count electric clutches Raven with Envisio Pro
