|
| Help was running 1860, gave me a call----Brown box had Warning screen to not touch Keycard, dont remove power supply............it was a 3rd of way thru a reboot type at the bottom of screen--but locked at that position
Not sure what sequence of keys were hit to end up at that spot. but SF1 signal was weak all day, presume he was trying to get autosteer working.
Long story short---called local JD greenstar rep....stated whatever damage to be done was probably done, might as well restart and take chances.
turned off power, restart....reprogram restarts and finishes, at that point screen flickering, chirping and tweeting.
settles down in time, but seed clutch not working with screen stateing: No power at main pin #7...........
Clutch on/off moves on screen....but neither it nor drill lift clutch mechanism can trigger power to main seed clutch.
direct 12v to clutch has it working fine. Next action is to run a separate switch 2 line wire to battery thru cab until rainy day.......
Take the brownbox to dealer for re-programming??? thanks in advance.......
.........gotta put a playstation in the cab to keep curious fingers off the ag computers next stop.....:) | |
|