|
West Central Iowa | I have found a guy that is a retired machinist and wants to sell his whole lot of tools. How much of this stuff would a beginning mill operator find uses for and any idea what it is worth.
Here is his decription of the condition of thses tools.
"I was always very picky as far as my tools went. I would not lend them out and always kept them cleaned and calibrated. I put them away 7 years ago in a tub with champher blocks and haven't been touched."
Here is the list of what he has for sale.
12" Mitutoyo Dial Calipers
0 to 6" Starrett Depth Mic 4" base
0 to 6" Starrett Depth Mic 2 1/2" base
0 to 1" Mitutoyo Micrometer
1 to 2" Mitutoyo Micrometer
2 to 3" Mitutoyo Micrometer
0 to 1" Starrett Blade Micrometer
6" Mitutoyo Dial Calipers
Mitutoyo Dial Indicator
Interapid Dial Indicator
13 pcs. Bondhus Balldriver Hex Tool Set .050 to 3/8
Multi Point Drill Gauge
2 sets of 1,2,3 Blocks
#1 & #2 T-Handle Top Wrench
1 Tapping Block
5/16" to 6" Telescoping Gauges
25 pcs. Radius Gauge Set 1/64" to 1/2"
26 pcs. Radius Gauge Set .010 to .650
1 Steelman Bend-A-Light 16"
1 Thread Pitch Gauge
6" Brown and Sharpe Square
Square Head Craftsman Protractor Stainless Steel
Transfer Punch Sets - 28 punch fractional, 26 punch letter, 60 punch numerical
2 Brass Tipped Die Bars
1 Mighty Mag Base
Craftsman Rubber and Plastic Tipped Hammer
2 Vise Stops
1/8" to 1 5/8" Set Parallels
2", 3", 4" and 6" Machinist Squares
Orange Stanley Dead Blow Hammer 42 oz.
1 Router Burr
(4) Cut off wheels
1 set Indicator Select Tips
1 Dyekem Bottles w/brush
Optivisor and Aux lens
Machinist Handbook
1" Black Face Dial Indicator - China
0 to 3" Set Mitutoyo OD Mics
0 to 6" Depth Mic Mitutoyo
Lufkin 3-4" Mic
Lufkin 4-5" Mic
Mitutoyo 2-3" Mic
(2) Mitutoyo 0-1" Mic
Mitutoyo 1-2" Mic
Jet Die Grinder 1/4" collet with c/o Blades
Angle Grinder with Sanding Blades
(2) Lathe Jaw Truing Blocks
(4) Torque Wrenches - T-9X60, T-8X60, T-6X50, T-7X50
(7) pcs. T Handle Craftsman
Centering Block
5/8" Allen Wrench
9/16" Allen Wrench
14 mm Allen Wrench
3/8" Allen Wrench
Lots of Taps 8/-32 to 6" 3/8x18 - 3/4" x 10 assortment probably 50 taps
Thanks! | |
|
Another mill question
