|
| One of our guys took an old truck to town to get some seed. He isn’t use to the splitter gear on a c7000. I assume he tried to shift out of high and it never shifted entirely. Anyways the splitter is working internally but the truck will not go into high or low. We pulled the splitter and it mechanically works. The interior fork spline seems ok. When we try to split it floats in a neutral and I can spin the drive shaft. We did pull it home and had traction enough on the rear end to drive it into the shop. Is my rear end ruined or am I missing something. Could the fork on the splicer have jumped a cog? Thanks | |
|
C7000 rear end issue
