|
N Central IA | How well does a hydraulic powered centrifigual pump work transferring 10-34-00. I have a planter with a 500 gal tank and a tractor with saddle tanks that I would like to be able to transfer my starter from tractor to planter and reverse if needed. How large of a pump and hose would be needed? I know 2 in. would be nice but it is hard to work with at fold points. I am going to use a total length of about 80 ft between the tanks with the pump located in the middle. I will fill the planter tank from the rear of planter when filling seed and would like to be able to pump from that tank to fill my saddle tanks on the tractor, then when planter tank gets empty when planting I want to pump back from tractor to planter. I think I have plumbing and valves figured out but wandered how well a hydraulic powered pump will work with that length of hose. Anybody done anything like this already? | |
|
Want to transfer 10-34-00 with hyd powered pump
