|
SW North Dakota | The seeder I bought last year came with a 8100 hiniker controller and a hiniker nh3 cooler. It worked good but the rate displayed on the monitor was never consistent. It was always jumping by about 5 lbs up and down from the chosen rate. We put on about 80lbs last year. It seemed to work better when the anhydrous tank was full or when we ran at a lower rate. I think when it does this it keeps trying to adjust the rate to compensate for the difference. What causes this to happen and is there any way to cure it? Or is this common and should I just deal with it? Thanks! | |
|
Hiniker 8100 controller NH3
