|
| So I asked on machinery but hoping to get some good answers on the precision side now. We were looking at an older 16 row 1250 bulk that was mechanical but wanted to convert it to hydraulic drive so we could variable rate our seeding and also wanted to add row clutches. However after doing some looking we found a newer 16 row bulk 1250 (less acres + insecticide) that is hydraulic with clutches only it's with a pro 600 or 700 I cant remember right now. My question is how hard or what is needed in order to run the seed monitoring, clutches, variable rate seeding through either a Trimble FMX or Ag Leader Integra (since we want to use one of those guidance) . We are strip till and currently run Integras for our guidance, fertilizer, NH3 but are familiar with Trimble's also if it would be easier to set up a 1250 with a trimble. We would prefer a single monitor if at all possible. TIA
| |
|
Case 1250 and Trimble/Ag Leader
