|
Hampton, Iowa | we have a schaben pull type sprayer with teejet controller/valves. we have a john deere rate controller and wanted to use it on sprayer to utilize our swath control. in the rate controller manual the only option there is for the control valve setting is the 1003 for a 344B. wondering if that is the setting ? we have an 844E teejet controller. i guess if there is antone with this same pair up what settings do i use for the entire setup in rate controller. it was just my luck that the tag is off the flowmeter also. i guess i will have to run a calibration. any help much appreciated.
| |
|