|
NE Nebraska | I'm sure I'm missing some thing simple but I have been through every setting in the menu's last spring and now this year and can't figure out how to get the coverage mapping to change from 30' to 50'. The implement width is set to 50' and the guideance line is correct at 50' but the coverage map it paints on the screen is always 30'. The implement image on screen shows 50' and its setup as 1 section. The first implement I set up last year was our planter, 30'. I have set up a dry spreader, harrow, disk, and drill all at different widths and all have painted 30' but have showed the correct width of the image on screen. What do I have set wrong? TIA
 (IMG-20120308-00017.jpg)
 (IMG-20120308-00019.jpg)
 (IMG-20120308-00020.jpg)
Attachments
----------------
 IMG-20120308-00017.jpg (36KB - 192 downloads)
IMG-20120308-00019.jpg (44KB - 209 downloads)
IMG-20120308-00020.jpg (24KB - 204 downloads)
| |
|
750 mapping problem
